- Description
-
Details
Socket wrench tools:
Coupler in acc. with DIN 3120, ISO 1174, with ball locking device
Square drive acc. to DIN 3120, ISO 1174, with ball retention groove
Chrome-vanadium-steel, matt satin chrome-plated
2C reversible ratchet 1/4": To DIN 3120 - A 6.3, ISO 1174, lever for right and left-hand operation, push button release, fine-toothed, oval form, dual-material handle
Square plug-in handle 1/4":
1-component handle with in-hex
Socket 1/4" hexagon: Metric, short, to DIN 3124, ISO 2725
Screwdriver bit socket 1/4" for in-hex screws: Pressed-in, phosphated pin
Screwdriver bit socket 1/4" slotted, PH, PZ, TX with drill hole: Pressed-in, phosphated pin
Socket extension 1/4":
Sliding T-handle with slide 1/4": Acc. to DIN 3122, ISO 3315
Universal joint 1/4": Joint bolted on, design to DIN 3123 - C 6.3
2C reversible ratchet 1/2": To DIN 3120 - A 12.5, ISO 1174, lever for right and left-hand operation, push button release, fine-toothed, oval form, dual-material handle
Socket extension 1/2":
Sliding T bar 1/2", with slide, to DIN 3122, ISO 3315
Universal joint 1/2": Joint bolted on, design to DIN 3123 - C 12.5
Socket, hex: Metric, short, to DIN 3124, ISO 2725
Screwdriver bit socket 1/2" for in-hex screws: Pressed-in, phosphated pin
Ratchet wrenches: Based on DIN 3113, ISO 3318, ring offset 15°, reversible for right and left-hand operation, 15° jaw position, surface matt satin chrome-plated
Hexagon socket key set: To DIN ISO 2936, hardened throughout, phosphated
Chrome-vanadium steel
Flat ring spanner: To DIN 838, ISO 3318, ISO 1085, ISO 10104, 5° offset, chrome vanadium steel, surface matt satin, chrome-plated
Water pump pliers: To DIN 8976 Form C, lengthways-serrated gripping surfaces, box joint, 7 settings, chrome vanadium steel, powder-coated
Combination pliers: To DIN ISO 5746, inductively hardened cutting edges, dual-material handle, forged
Bent nose telephone pliers: To DIN ISO 5745, straight gripping surfaces, lengthways-serrated, inductively hardened cutting edges, dual-material handle, forged
Side cutters: To DIN ISO 5749, slender head, inductively hardened, long cutting edges, dual-material handle, forged
Circlip pliers: To DIN 5254 Form A, straight precision tips, opening spring, DIN 471 for retaining rings, DIN 983
To DIN 5254 Form B, angled precision tips, opening spring, DIN 471 for retaining rings, DIN 983
To DIN 5256 Form C, straight precision tips, opening spring, DIN 472 for retaining rings, DIN 984
To DIN 5256 Form D, 90° angled precision tips, DIN 472 for retaining rings, DIN 984
Dipped handle protectors
Chrome-vanadium steel
Engineers’ hammer: Forged hammer head of tempered steel, inductively hardened striking surfaces, to DIN 1041, ash handle, paint-coated shaft end, ring wedge
Flat cold chisel, flat oval: To DIN 6453, cutting edge and head ground, impact end tempered, chrome-vanadium steel
Cross-cut chisel, flat oval: To DIN 6451, cutting edge, sides and head ground, impact end tempered, chrome-vanadium steel
Hexagonal punch: To DIN 6458, impact end annealed, chrome-vanadium steel
Centre punch, hexagonal: To DIN 7250, impact end annealed, chrome-vanadium steel
Pin punch, octagonal: To DIN 6450, impact end annealed, chrome-vanadium steel
2C screwdriver: Slot and cross-slotted PZ, to DIN, high-grade chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, dual-material handle, 5-edge grip head, elongated hole in handle
2C screwdriver TX: Chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, dual-material handle, 5-edge grip head, elongated hole in handle
Digital measuring calliper: LCD display, reset setting, precision roller adjustment, mm/inch changeover, ground tips, in box incl. spare battery, operating instructions, PC interface, locking screw, thread table on the back
Clamp locking plier: Lengthways-serrated grip surfaces, setting screw and release lever, one-hand operation, surface chrome-plated, chrome vanadium steel
Half-round file: To DIN 7261, dual-material handle, hands-friendly transfer of force, hole for hanging up
Tape measure: ABS dual-material housing, clip, nylon-coated tape, mm-graduation, with tape rewind and lock, magnetic stop, Accuracy Class II
Utility knife: Blade 25 mm, synthetic housing, metal blade guide, one-handed operation, 5 spare blades
(De)magnetizer: Magnetizer for bolting and gripping tools, demagnetizer for tools
Feeler gauge set: Protective handle, folding, blades tapering to a cone, of hardened spring steel
Bit box: Drive adapter with magnetic bit locking, hexagon drive to DIN 3126 ISO 1173 - C 6.3, machine operated, phosphated, plastic box
Newsletter
Account
Payment
