Fischer 545637 Ceiling Nail FDN II 6mm x 70mm Pack x 100

• The fischer ceiling nail FDN II is a zinc-plated steel push-through anchor
• The FDN II is approved for multiple anchorings of non-structural systems in concrete
• The fischer ceiling nail FDN II is ideal for anchoring wire and nonious hangers for suspended ceilings, ventilation systems, and metal profiles in cracked concrete
• The European Technical Approval and classification as per fire resistance class R 120 ensure added safety
• The ceiling nail is installed time-saving using a push-through installation and is hammered into the drill hole

Top Features

• The simple active principle allows for cost-efficient hammerset installation
• The two hit zones ensure correct installation
• The head embossing offers a simple control of the anchoring, and thus saves time

Advantages

• The simple active principle allows for cost-efficient hammerset installation
• The new short version FDN II K with reduced anchorage depth is faster to install and reduces reinforcement hits
• The flush-sunk expansion nail signifies the complete expansion of the anchor, and thereby ensures minimum movement when under load
• The fischer FDN II can be installed without cleaning of the drill hole
• The head embossing offers a simple control of the anchoring, and thus saves time

Functionality

• The FDN II is suitable for push-through installation
• The FDN II ceiling nail is driven into the drill hole with a hammer until it is firmly in position
• Do not hit the expansion wedge at this stage
• Then, drive the expansion wedge in flush to the nail head
• This causes the FDN II to expand against the drill hole wall

ETA Certification Document

https://fiproductmedia.azureedge.net/media/Certification%20Documents/ETA%20European%20Technical%20Assessment/fischer/ZD_ETAB_F_17-0736_SEN_AIP_V1.pdf