- Description
-
Details
- Fischer 542112 Threaded Rod Plug RODFORCE FGD M8 x 35 with 50 mm Threaded Rod
- The short plug length prevents reinforcement hits and reduces drilling effort
- The visible edge of the plug serves as visual setting check and guarantees a correct setting
- The closed plug tip is used to check the setting depth as a stop point
- This predetermined break point also allows the threaded rod to be hammered-in deeper
- The innovative plug geometry allows quick and easy installation of the threaded rod with a few hammer blows
- The short plug length prevents reinforcement hits and guarantees a secure utilization in reinforced concrete
- The teeth inside the plug allow standard, metric threads to be held
- This saves a large assortment of stud screws
- Installation without special tools: The only thing needed to set the plug is a hammer
- Visible edge of the plug serves as visual setting check and guarantees correct setting
- Applications Suspension for individual pipes Plumbing and heating fixings Cable and pipe clips Ceiling lights Consoles Mounting rails
- Building materials Concrete Solid sand-lime brick Solid brick
- When hammering-in the threaded rod, the plug expands in four directions as a result of the conical inner geometry. The plug is set using pre-positioned installation and this is possible in two different ways:
- Pre-installation of the threaded rods in the plug with both being hammered into the wall together or pre-inserting of the RODFORCE into the drill hole followed by hammering-in of the threaded rod
- The teeth inside the plug mechanically interlock the metric thread securely with the threaded rod
- The unique elements on the outside of the plug brace against the wall of the drill hole.
- Easy to check and adjust:
- To check the setting depth, the closed plug tip is used as a stop point.
- This predetermined break point also allows the threaded rod to be hammered-in deeper.
- Features
Features
Drill diameter d0 12 [mm] Min. drill hole depth h1 40 [mm] Anchor length l 35 [mm] Min. drop-in penetration e1 33 [mm] Threaded rod-Ø M 8 x 50
Newsletter
Account
Payment
