Fischer 523135 Through Bolt FXA M10 x 126mm Pack x 20

• Drill diameter d0 10 [mm] Drill hole diameter in fixture df 12 [Ø mm]
• Min. drill hole depth for through fixings h2 118 [mm]
• Anchor length l 126 [mm]
• Max. usable length tfix 50 [mm]
• Width across nut SW 17 [mm]

The standard anchorage depth achieves the maximum loadbearing capacities so fewer fixing points and smaller anchor plates are required

• With only a few hammer blows and minimal torque slippage installation is a simple process
• The drive-in pin protects the thread from damage, and ensures a faster installation and dismantling of the attachment
• The FXA is suitable for pre-positioned and push through installation, also suitable for stand off installation under certain conditions
• Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut).
• When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall
• The head embossing offers a simple control of the anchoring.

Functioning

• The FXA is suitable for pre-positioned and push through installation, also suitable for stand off installation under certain conditions
• Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut)
• When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall
• The head embossing offers a simple control of the anchoring.