- Description
-
Details
- The fischer Highbond rod anchor FHB II-A S is produced from zinc-plated steel
- The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED.
- When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall
- Using the fischer Highbond system FHB II means that railings, machines and heavy steel constructions are securely installed within internal areas
Top Features
- Reduces anchorage depth, lowers expense when drilling and installing
- This saves costs
- Through-type installations without additional aids
- This saves time
- Optimised for low axial and edge distances in cracked concrete
- No drill hole cleaning is required when using a mortar cartridge
- This saves time.
- ETA approval for cracked concrete
Advantages
- The reduced anchorage depth of the FHB II-A S minimises the drilling and installation effort
- In addition using the combination with FHB II-P/-PF capsule no drill hole cleaning is required
- Thus allowing for an especially economical and time-saving fixing
- With the anchor rod FHB II-A S, the drill bit diameter is the same as the thread diameter
- This allows for push-through installation without any tools and reduces the amount of mortar required
- The cone shape of the anchor rod FHB II-A S is optimised for small axial and edge distances in cracked concrete, as well as thin concrete members
- As a result, it is suitable for a wide range of applications
- The anchor rod FHB II-A S is approved for use both with capsules and with injection mortar
- This guarantees maximum flexibility in the application.
Functioning
- The FHB II-A S is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation
- With the FHB II-A S, the drill bit diameter is the same as the thread diameter, similar to with an anchor bolt
- The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole
- When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall
- When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill
- Use the RA-SDS setting tool, FIS-62420.
Assembly Instructions
https://content.fischer.de/cbfiles/fischer/zulassungen/ma_01_fhbii_f_%23sall_%23aip_%23v1.pdf
Load Table
https://content.fischer.de/cbfiles/fischer/lastentabelle/lt_01_fhbiias_f_%23sen_%23aip_%23v2.pdf
Safety Data
https://content.fischer.de/cbfiles/fischer/zulassungen/zd_sdb_01_fhbiip_f_%23sen_%23aip_%23v8.pdf
Approval Documents
https://content.fischer.de/cbfiles/fischer/zulassungen/zd_dop_fhb-ii-1_f_%23sen_%23aip_%23v1.pdf
- Features
Features
ETA-approval Drill diameter 10 mm Drill hole depth 90 mm Anchorage depth 75 mm Thread M10 Width across nut 17 mm Scale parts mortar 4 Packaging Folding box Amount 10 pcs. GTIN (EAN-Code) 4048962077971 Applications Suitable for: Guard rails Façades Staircases Steel brackets Masts Rash protection Steelwork constructions Timber constructions Ideal for: Push-through installation Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15
Newsletter
Account
Payment
