- Description
-
Details
- The fischer nail anchor FNA II 6 with nail head is made of highly corrosion-resistant steel
- The FNA II is set in a time-saving manner in the push-through installation with just a few taps of the hammer
- The installed FNA II expands automatically under load
- The cone is then pulled into the expansion clip and expands it against the hole wall
- Above all, the fischer nail anchor FNA II 6 with nail head is suitable for fixing fire protection boards, air lines and and mounting rails in highly corrosive atmospheres
Top Features
- Hammerset installation saves time
- No reinforcement hits due to low anchorage depth
- This saves time and costs during series installation
- Expansion clip provides a firm hold
- ETA approval for multiple fixings
- Made of highly corrosion-resistant steel for highly-corrosive atmospheres
Advantages
- The special active principle allows for a simple hammerset installation and, therefore, a short processing time
- The extremely short anchor depth prevents reinforcement hits, and creates the conditions for a trouble-free installation
- The optimised expansion clip ensures hold when placing in the drill hole, and prevents it falling out during overhead installations
- The massive shaft cross-section guarantees a high load-bearing capacity, thus offering an extremely high level of safety
- A range of head shapes allows for the fixing of wide-ranging fixtures, and for the ideal adaptation to suit the intended use
Functioning
- The FNA II with nail head is suitable for push-through installation
- The installed nail anchor FNA II expands automatically under load
- The cone is pulled into the expansion clip and expands it against the drill hole wall
- Available setting tools: FNA S-SBO to slip onto the drill, FNA S-SDS for series installation with a drilling hammer, FNA S-H for the manual installation of mounting rails.
Load Table for Download
https://content.fischer.de/cbfiles/fischer/lastentabelle/lt_01_fna-ii_f_%23sen_%23aip_%23v2.pdf
ETA Documents for Downloading
https://content.fischer.de/cbfiles/fischer/zulassungen/eta/zd_etab_f_06-0175_%23sen_%23aip_%23v1.pdf
https://content.fischer.de/cbfiles/fischer/zulassungen/zd_dop_fna-ii_f_%23sall_%23aip_%23v2.pdf
- Features
Features
Technical Data ETA-approval Drill hole diameter d0 6 [mm] Min. drill hole depth for through fixings h2 45 [mm] Anchor length l 40 [mm] Max. fixture thickness t fix 5 [mm] Head-Ø dK 13.0 [mm] Amount 25 Unit(s) GTIN (EAN Code) 4006209441244