Welcome to Lawson HIS

Fischer 44122 FNA II 6 x 30 /5 stainless steel A4 Pack x 100

Fischer 44122 FNA II 6 x 30 /5 stainless steel A4 Pack x 100
Ex. VAT £214.53 Inc. VAT £257.44

Usually ships within 2 working days with Free Shipping

The installation-friendly Hammerset anchor made of stainless steel for multiple fixings

Description

Details

 

  • The fischer nail anchor FNA II 6 with nail head is made of stainless steel
  • The FNA II is set in a time-saving manner in the push-through installation with just a few taps of the hammer
  • The installed FNA II expands automatically under load
  • The cone is then pulled into the expansion clip and expands it against the hole wall
  • Above all, the fischer nail anchor FNA II 6 with nail head is suitable for fixing mounting rails and timber or sub-constructions in external areas

Top Features

      • Hammerset installation saves time
      • No reinforcement hits due to low anchorage depth
      • This saves time and costs during series installation
      • Expansion clip provides a firm hold
      • ETA approval for multiple fixings
  • Made of stainless steel for fixings used outside.

Advantages

      • Easy removal of fire protection board without damage
      • Reusability of fire protection board
      • Safe anchorage, particularly when exposed to vibration, wind, and pushing/pulling influences
      • Low anchoring depth (30 mm)
      • Convenient installation without torque-controlled setting tool
      • Approved system that has proven itself one million times over

Functionality

      • The washer significantly increases the pulling forces and, at the same time, prevents the damage of the panel during removal
      • Removal by means of easy pinching off of nail head thanks to special 2-stage plie

Load Table

https://content.fischer.de/cbfiles/fischer/lastentabelle/lt_01_fna-ii_f_%23sen_%23aip_%23v2.pdf

Documents for Downloading

https://content.fischer.de/cbfiles/fischer/zulassungen/eta/zd_etab_f_06-0175_%23sen_%23aip_%23v1.pdf

https://content.fischer.de/cbfiles/fischer/zulassungen/zd_dop_fna-ii_f_%23sall_%23aip_%23v2.pdf

Features

Features

ETA-approval
Drill hole diameter d0 6 [mm]
Min. drill hole depth for through fixings h2 45 [mm]
Anchor length l 40 [mm]
Max. fixture thickness t fix 5 [mm]
Head-Ø dK 13.0 [mm]
Amount 100 Unit(s)
GTIN (EAN Code) 4006209441220
Applications
Fire protection plates
Fire protection boards
Ventilation systems
Wire and Nonius hangers
Mounting rails
Metal clamps
Substructures made of wood and metal
Building materials
Concrete C12/15 to C50/60, cracked and non-cracked
For multi-point fixings of non-load-bearing systems
You can find detailed information on building materials in the registration document.