- Description
-
Details
- The fischer injection anchor sleeve FIS H K is the system component for the professional, mortar-saving installation of the threaded rod FIS A or internal threaded anchor FIS E in perforated brick masonry
- The fischer injection mortars FIS V, FIS VW HIGH SPEED, FIS VS LOW SPEED, FIS VL, FIS GREEN, FIS P Plus, and FIS P can be used with it.
- The optimised grating structure reduces the use of injection mortar
- When the threaded rod and internal threaded anchor are installed, the mortar is pressed through the grating structure and creates a form fit with the perforated brick
- This directs the load into the building material
- Setting takes place in a pre-positioned installation
- You can use the injection anchor sleeve to bridge non-load-bearing layers
- The approvals of the various injection mortars must be observed
Top Features
- Lattice structure of anchor sleeves lowers mortar consumption
- Anchor sleeve allows for optimum mechanical interlock in perforated brick
- The centring blades fix anchor rods with various diameters
- This lowers complexity and simplifies storage
- Barbed hook: no falling with overhead installations
- ETA approval
Advantages
- The grating structure of the FIS H K anchor sleeve is adapted for the injection mortars FIS V, FIS GREEN and FIS P Plus, and ensures sparing mortar use with the best interlock
- The centring blades perfectly align the anchor in the anchor sleeve, and allow for use with various threaded rod diameters
- The barbed hooks secure the anchor sleeve in the drill hole and allow for a trouble-free overhead installation
- The geometry of the anchor sleeves allows for the bridging of non-bearing layers for a simple and convenient installation
Functioning
- The system can be used with any of the following injection mortars: FIS V, FIS VW HIGH SPEED, FIS VS LOW SPEED, FIS GREEN or FIS P Plus. FIS P can be used but does not have approvals
- The system is suitable for pre-positioned installation when combined with injection anchor sleeves and threaded rods FIS A or internal threaded anchors FIS E
- The anchor sleeve is placed in the drill hole, and filled with injection mortar from the anchor sleeve base
- Turning in the anchor causes the mortar to be pushed through the anchor sleeve's grating structure, so that it fits the base material perfectly
- The load is borne by the interlock.
Load Table for Downloading
https://content.fischer.de/cbfiles/fischer/lastentabelle/lt_01_lomau_f_%23sen_%23aip_%23v1.pdf
Approval Documents for Downloading
https://content.fischer.de/cbfiles/fischer/zulassungen/eta/zd_etab_f_10-0383_%23sen_%23aip_%23v1.pdf https://content.fischer.de/cbfiles/fischer/zulassungen/zd_dop_fis-v-mauer-1_f_%23sen_%23aip_%23v1.pdf
- Features
Features
ETA-approval Drill hole diameter d0 12 [mm] Min. drill hole depth h1 95 [mm] Effect. anchorage depth hef 85 [mm] Match FIS A M6-M8 Fill quantity per sleeve 10 [scale units] Amount 50 Unit(s) GTIN (EAN Code) 8001132419014 Applications Anchorings in perforated brick masonry with injection mortars FIS V, FIS VL, FIS P Plus, FIS P, and FIS GREEN Building materials Approved for: Vertically perforated brick Hollow blocks made from lightweight concrete Hollow blocks made from concrete Perforated sand-lime brick Solid sand-lime brick Solid brick Also suitable for: Hollow pumice slabs Slabs made of hollow brick and other perforated brick Solid pumice and other solid building materials
Newsletter
Account
Payment
